2015-2019 Ford F150 4wd & 2wd - "Standard Duty" SES Suspension Kit by Timbren - (Rear)

Timbren #FR1504E
Timbren - fr1504e-timbren-f150
Authorized Dealer
Our Price
  • $214.67
Free Shipping

Ships Today or Tomorrow (depending on order time)

Arrives 1 to 5 days after product ships

Description

Timbren SES (Suspension Enhancement Systems) Kits control trailer sway, eliminate suspension sag, control body roll, and improve vehicle ride. By replacing the factory bump stops with the SES kit you will increase your vehicles suspension performance when loaded down with heavy loads. Custom fit kits means most applications bolt on using factory holes in a matter of minutes. Timbren SES kits are made of Aeon Hollow Rubber that absorb shock and eliminate bottoming out on and off road. Backed by a lifetime warranty ensures you can depend on these to help your Ford F150 perform when you need them the most.

Features and Benefits

  • Timbren SES kit #FR1504E is custom fit for the Ford F150
  • Easy installation (most applications require no drilling)
  • Reduce sway when cornering
  • Eliminates sag
  • Improves vehicle stability
  • Supports heavy loads

Tech Specs

Download Instructions: FR1504E Instructions
Weight Capacity: 6000 LBS.
Axle (front or rear): Rear
Installation Type: No Drilling Required
Average Install Time: 30 min to 1 hour (no drill applications only)
Warranty: Lifetime Warranty (original owner)
Weight: 11.00 lbs.
Part FR1504E fits:
  • 2019 Ford F150
  • 2018 Ford F150
  • 2017 Ford F150
  • 2016 Ford F150
  • 2015 Ford F150

Customer Questions & Answers

Have a question about this product? Let one of our experts answer it for you!

We will respond with an answer ASAP.

Reviews

  • 4.2 out of 5 Overall
  • 100% reviews recommend this product
Review Product
5
Out Standing
It was just what i needed to haul my 18 foot inclosed car hauler with 7000 pouds in it, smoth ride even on bad roads and hardly any sway was a easy to insatll as will would recomend it even if you are not hauling heavy loads!
Recommend this Product: YES
2016 F150 XLT
– Value
– Quality
– Installation
4
Excellent Product with Some Design and Build Issues
The product works as advertised, but it has some design and build issues. I installed the kit on a 2016 Ford F150 and the 1" spacers were needed to achieve the desired separation between the springs and frame. Installation took 30-45 minutes. The design and build issues: 1. The product arrived with some flaking paint on the mounting brackets. My opinion is that it is unacceptable for any manufacturer to spray paint vice powder coat a suspension product. 2. The bracket has two mounting bolts. One attaches the bracket to the frame. The second one attached the rubber "spring" to the bracket. The bracket has a hole, supposedly to allow access to the frame bolt, which is about `" in diameter. However, it is offset from the bolt and is not large enough to allow room to install a 3/8" drive socket and swivel connector. I had to use a ratcheting box-end wrench which takes some time due to limited swing of the wrench. It was impossible to torque down the frame bolt without a crow's foot adapter for the torque wrench.
Recommend this Product: YES
2016 Ford F150
– Value
– Quality
– Installation
3
Great Product with a Few Build Issues
A great product for the intended use. I had to install the 1" spacer on my truck to achieve the correct pre-load gap. A few not so good things: 1. A suspension product should be powdered coated. The brackets are painted and mine arrived with paint flaking off already which is a poor design. 2. The Timbren rubber spring attaches to the bracket with a bolt. The entire assembly attaches via a separate bolt to the frame. The bracket has a hole cutout supposedly to allow betters access between the plates to tighten the bolt to the frame, but it is not large enough for a 3/8" swivel socket connector and too far offset to allow an extension to fit on the socket. I had to use a ratcheting box end wrench and the bracket limits the swing. The product listing stated it would ship next day at the time of my order. The shipment was delayed for 3 days which spanned a weekend and resulted in a 4 day shipment delay. My product has already shipped before I received any tracking information and it did not update until the morning that it was on the truck for delivery.
Recommend this Product: YES
2016 Ford F150
– Value
– Quality
– Installation
5
Great product
Ordered this product last Monday and received them on Friday the same week. Installed them on my 2016 F150 in about 45 minutes. Took me longer to get truck jacked up and stable than it did to install the suspension supports. Went Saturday to get my 31 foot travel trailer from the storage lot and was completely impressed with how the SES Suspension Kit worked. Took virtually ALL of the sag out of the rear end of my truck. Highly recommend the product.
Recommend this Product: YES
2016 Ford F150 2WD
– Value
– Quality
– Installation
4
Great replacement part
Installed on my 2016 Ford F-150 2 wheel drive to pull my 35 foot camping trailer. Did exactly what the product described it would. Took virtually all the sag out.
Recommend this Product: YES
2016 Ford F-150 4x2
– Value
– Quality
– Installation