Get your F150 in the air with this easy to install, high quality suspension lift. Tuff Country's 3 inch lift kit for the Ford F150 will allow you to fit up to 35 inch x 11.5 inch tires (with minor trimming) while keeping a factory ride. A combination of upper coil/strut spacers and upper control arms are used to lift the front of the F150 3". This maintains the factory front end geometry to avoid any increased wear and tear. The rear end is lifted using 3 inch cast iron lift blocks and extended u-bolts (1" factory blocks are replaced). No drilling is required and the factory shocks and struts do not need to be replaced.
At Suspension Connection we are the #1 retailer of Tuff Country products in the world. Great prices, expert knowledge and exceptional customer service are why so many customers trust us with their Tuff Country purchases. Try us out!
| Tuff Country has been producing quality suspension products for over 25 years and backs all lift kits with a limited lifetime warranty. |
![]() |
View install video of this kit below, see the entire Ford F150 lift article on our blog.
1. New extended rear shocks are not required to install this leveling kit properly, but recommended.
2. Requires aftermarket wheels with 5.5" backspacing or less. Factory tires and rims can be used, however mounting wider tires on the factory rims will cause contact of the upper control arms.
| Download Instructions | 23000 Instructions |
| Recommended Tire Size: | 33" x 12.5" or 35" x 11.5" (with trimming) |
| Amount of Lift: | 3" Front / 2" Rear |
| Items Included: | 2) Front upper coil spacers, 2) Upper Control Arms, 2) Pre-load spacers, 2) 3" cast iron blocks, 4) Extended rear u-bolts, 2) Hardware bags |
| Weight: | 55 lbs. |
| Part 23000 fits: |
|