Gain additional tire clearance to fit 33" tires and get a new new look with this Tuff County #55907 Toyota Tundra 5" lift kit. This Toyota Tundra lift kit uses new replacement heavy duty spindles that eliminate the need for ball joint spacers. Upper ball joints & bearings are pressed into the new spindles. Upper coil / strut spacers are used to lift the front end and maintain a factory ride. Replacement struts are not required. A lower subframe drops the lower control arms while stabilizing the front end with its one piece design. Once installed 33" x 12.5" tires can be mounted for a whole new look.
Note: To purchase Tuff Country 55907KN (w/SX8000 Shocks) or 55907KH (w/SX6000 Shocks) please select in options above.
At Suspension Connection we are the #1 retailer of Tuff Country products in the world. Great prices, expert knowledge and exceptional customer service are why so many customers trust us with their Tuff Country purchases. Try us out!
1. Factory length shocks must be replaced with new extended rear shocks to install this lift kit properly. Please choose shocks & boots in the "Options" fields above if you have not already purchased extended shocks. Front struts can be retained
2. Factory rims will not fit with this lift kit. Rims with a 4.5" back spacing or less is required.
3. This kit is designed to fit with ABS brakes and automatic hubs. Vehicles without ABS brakes require optional ABS plugs.
|Download Instructions:||55907 Instructions|
|Recommended Tire Size:||33" x 12.5"|
|Amount of Lift:||5" Front / 4" Rear|
1) One piece subframe, 2) Upper strut spacers, 2) Heavy duty steering knuckles, 2) Differential drop brackets, 2) Sway bar drop brackets, 1) Steering shaft extension, 2) Cast iron 4" rear lift blocks, 4) Rear ubolts, 1) Hardware bag
|Part 55907 fits:||