Want to lift your Dodge Ram 3500 and get the best possible ride and handling? Want more suspension articulation? Tuff Country EZ-Ride Suspension's Dodge Ram "Long Arm" Lift Kits are your answer!
This lift kit is designed to lift your Dodge Ram 3500 3" using the long arm suspension system and all the great benefits. By replacing the factory control arms with the longer arms this creates less of an angle on the control arms which results in a much softer ride, dramatic handling improvements (reduces bump steer significantly) and better suspension articulation. Both upper and lower arms use greasable, re-build able flex joints which will reduce or eliminate the front suspension from binding. Upper coil spring tower spacers mount above your factory coil springs to lift the front end and maintain a factory ride. A front track bar relocating bracket ensure everything is aligned properly. All this adds up to the ultimate Dodge Ram suspension lift kit.
Note: To purchase Tuff Country 33925KN (w/SX8000 Shocks) please select in options above.
At Suspension Connection we are the #1 retailer of Tuff Country products in the world. Great prices, expert knowledge and exceptional customer service are why so many customers trust us with their Tuff Country purchases. Try us out!
Tuff Country has been producing quality suspension products for over 25 years and backs all lift kits with a limited lifetime warranty.
Features and Benefits
Allows use of 33" x 12.5" tires
Dramatic improvement in ride quality and handling, reduces bump steer
More suspension articulation for off-roading
Simple bolt-on installation
Greasable and Re-Buildable Flex Joints to reduce suspension binding
Upgrade kit fits all Tuf Country lift kits and a variety of other mfg's lift kits
Limited Lifetime Warranty
1. Factory length shocks must be replaced with new extended shocks to install this lift kit properly. Please choose shocks & boots in the "Options" fields above if you have not already purchased extended shocks.
2. Will not fit with the "Off Road" models.
3. Will not fit with Dana 70 or Dana 80 front end.
2) 3" Upper coil spring tower brackets, 2) Lower Control Arms, 2) Upper Control Arms, 2) Long Arm Mounting Brackets, 1) track bar bracket, 2) Rear Add-a-Leafs, 2) Front Brake Line Relocating Brackets, 1) Rear Brake Line Relocating Bracket, 1) Hardware bar, 1) Poly & sleeve kit