Auto Experts Since 1988
- Low Price Guarantee
- A+ Rating with BBB
Call
800-903-2760
- Mon thru Fri, 8:00am - 4:30pm MST
2015-2018 Ford F150 4wd - Curt MFG "NO DRILL" Class 3 Trailer Hitch (FRONT Mount)
Curt MFG
#31083
Sale Price:
- $182.95
$215.23
Save: $32.28
Ships Today or Tomorrow (depending on order time)
Description
Curt 31083 front Ford F150 trailer hitches are a great solution for easy launching of a boat, maneuvering a trailer into a camp site, mounting an electric winch or using any number of hitch accessories for the front end of your Ford F150. Using a 2 inch square receiver opening and a weight capacity of 5000 lbs. you have many towing options. Custom fit for the Ford F150, this trailer hitch uses existing holes and mounting points so no new holes are drilled. Powder coated with a heavy, high-gloss finish this hitch is durable and attractive. Backed by a limited lifetime warranty.
Features and Benefits
- Curt # 31083 is Custom fit for the Ford F150
- 5000 lb load capacity
- Black Powder Coated
- Curt Limited Lifetime Warranty
- 2" Receiver Tube
Installation Notes
Minor fascia trim
Tech Specs
| Download Instructions: | 31083 Instructions |
| Weight Carrying Capacity | 5000 lbs. |
| Max Tongue Weight: | 500 lbs |
| Mount Type: | Front Mount |
| Type of Finish: | Black Gloss Powder Coat |
| Hitch Receiver Opening Size: | 2" Receiver Tube |
| Install Time: | 45 minutes |
| Drilling Required (Yes / No): | No |
| Items Included: |
(1) Curt 31083 Trailer Hitch and mounting hardware |
| Weight: | 41.00 lbs. |
| Part 31083 fits: |
|
Products You May Like
Customer Questions & Answers
Reviews
-
- 4.0 out of 1 Overall
- 100% reviews recommend this product
Good, solid hitch
I installed the hitch without any difficulty but the bottom of the receiver was only 5.5 inches above the pavement. First time pulling into a parking spot the receiver plunged into the dirt bank of the parking lot. On the way back into my uphill driveway the bottom of the tube scraped the pavement. Too low to the ground so I drilled 4 new holes in the hitch mounting plates and had to cut 1.5” off the front tabs to clear the crossmember. I now have 7” of clearance and the mount is at the top of the air dam vs. 1” below it
Recommend this Product:
YES
Theo
2017 Ford F-150 (2WD)
Truck & Auto Experts Since
1988!!
2018 © Suspension Connection. All Rights Reserved.