2010-2012 Dodge Ram 3500 Long & Short bed (Diesel Only) - Turnoverball Gooseneck Hitch by B & W


The B&W "Turnoverball" Gooseneck hitch is the perfect solution for those truck owners looking to still use their truck bed to haul loads while not towing their trailer. This innovative design allows you to quickly and easily turn the gooseneck ball over when not in use to obtain a flat surface in the floor of your truck bed.

Built to make installing the hitch a breeze. Installation is done without any welding required. Most applications only require drilling of the 4 inch hole in the truck bed to accommodate the gooseneck hitch ball. The remaining installation uses existing holes in the truck frame.

The B & W Turnoverball Gooseneck hitch can easily be converted to a 5th wheel style hitch with the use of the Companion head and base unit (sold separately) making this hitch one of the most versatile hitches on the market.

B & W hitches are proudly manufactured in the USA at their facilities in Kansas. All products are built to last and backed by a limited lifetime warranty.

Features and Benefits

  • Quickly changes from a hitch to a flat surface bed
  • This B&W Turnoverball systems is custom fit for the Dodge Ram 3500
  • Strong, solid, machined 2 5/16" ball
  • Durable powder coat finish
  • Most applications are no drill bolt to frame (with only a 4" hole in bed)
  • Solid machined receiver socket
  • Spring loaded flexible latch handle for 5/8" steel locking pin continuing all the way through the ball
  • Limited lifetime warranty
  • Proudly manufactured in the USA

Tech Specs

Download Instructions: GNRK1313 Instructions
Gross trailer weight: 30,000 lbs
Vertical tongue weight: 7,500 lbs
Made in USA: Yes
Weight: 118.00 lbs.
Part GNRK1313 fits:
  • 2012 Dodge Ram 3500
  • 2011 Dodge Ram 3500
  • 2010 Dodge Ram 3500


Customer Questions & Answers

Have a question about this product? Let one of our experts answer it for you!

We will respond with an answer ASAP.

have just purchased the model 1313 for a 2007 ram 2500 short box. Instructions say to measure 45.5 " from rear of box for center of 4'' hole.done that but it doesnt seem like it is centered between rails under the box. is the measurement correct. the hole would be about 6'' in front of axle is this right
According to B&W this measurement is correct. You will measure from the rear of the box (tailgate side) 45.5" and that will be the center of the hole. This will put it about 6" in front of the axle, for weight distribution. This spreads the weight of the trailer across the whole vehicle not just the rear of the truck.


  • 5.0 out of 1 Overall
  • 100% reviews recommend this product
Review Product
easy install
Easy install.
Recommend this Product: YES
2012 Ram 3500
– Value
– Quality
– Installation