1988-2000 Chevy Truck 4WD 1/2 ton, 3/4 ton & 1 ton - "Heavy Duty" SES Suspension Kit by Timbren - (Rear)

Product Information

Timbren SES (Suspension Enhancement Systems) Kits control trailer sway, eliminate suspension sag, control body roll, and improve vehicle ride. By replacing the factory bump stops with the SES kit you will increase your vehicles suspension performance when loaded down with heavy loads. Custom fit kits means most applications bolt on using factory holes in a matter of minutes. Timbren SES kits are made of Aeon Hollow Rubber that absorb shock and eliminate bottoming out on and off road. Backed by a lifetime warranty ensures you can depend on these to help your Chevy Truck perform when you need them the most.

Features & Benefits

  • Timbren SES kit #GMRCK35MA is custom fit for the Chevy Truck
  • Easy installation (most applications require no drilling)
  • Reduce sway when cornering
  • Eliminates sag
  • Improves vehicle stability
  • Supports heavy loads

Product Video

Tech Specs

Download Instructions GMRCK35MA Instructions
Weight Capacity: 10000 LBS.
Axle (front or rear): Rear
Installation Type: No Drilling Required
Average Install Time: 30 min to 1 hour (no drill applications only)
Warranty: Lifetime Warranty (original owner)
Weight:
21 lbs.
SKU #GMRCK35MA Fits:
  • 2000 Chevy Truck 4WD 1/2 ton, 3/4 ton & 1 ton
  • 1999 Chevy Truck 4WD 1/2 ton, 3/4 ton & 1 ton
  • 1998 Chevy Truck 4WD 1/2 ton, 3/4 ton & 1 ton
  • 1997 Chevy Truck 4WD 1/2 ton, 3/4 ton & 1 ton
  • 1996 Chevy Truck 4WD 1/2 ton, 3/4 ton & 1 ton
  • 1995 Chevy Truck 4WD 1/2 ton, 3/4 ton & 1 ton
  • 1994 Chevy Truck 4WD 1/2 ton, 3/4 ton & 1 ton
  • 1993 Chevy Truck 4WD 1/2 ton, 3/4 ton & 1 ton
  • 1992 Chevy Truck 4WD 1/2 ton, 3/4 ton & 1 ton
  • 1991 Chevy Truck 4WD 1/2 ton, 3/4 ton & 1 ton
  • 1990 Chevy Truck 4WD 1/2 ton, 3/4 ton & 1 ton
  • 1989 Chevy Truck 4WD 1/2 ton, 3/4 ton & 1 ton
  • 1988 Chevy Truck 4WD 1/2 ton, 3/4 ton & 1 ton
  • Review This Product