Tuff Country # 97059 block kit include lift blocks and ubolts designed to raise the rear of your Ford F250 / F350. Installation is done by inserting the cast lift blocks between the factory rear leaf springs and axle. Extended zinc plated rear ubolts designed specifically for the Ford F250 / F350 are use to replace the factory ubolts.
Features
- Lift size varies depending on factory block size
- Maintains a factory ride
- Custom made for the Ford F250/F350
- Lift blocks are constructed of heavy duty cast iron
- Blocks are tapered to eliminate or reduce driveline vibration
- Zinc plated corrosion resistant extended ubolts
- Simple Bolt-on Installation
| Amount of Lift | Varies depending on size of factory blocks |
| Blocks Tapered (YES/NO) | YES |
| Lift Block Dimensions | 5.5" (H) x 3" (W) x 5 1/2" (L) |
| Ubolt Dimensions | 5/8" x 3 5/8" x 14 1/2" - Round |
Items Included
1. Designed for rear axles only. Never use lift blocks with a front axle
2. Will not fit with factory contact overloads.
3. Included 5.5" lift blocks replace the factory blocks. Amount of actual lift depends on size of factory blocks. Factory block sizes vary on this vehicle. Please check the size of your factory blocks to determine amount of lift. Ubolts are not long enough to stack both blocks or recommended.
Fits the Following Model:
Ford F250 / F350 4x4
Fits the Following Years:
99, 00, 01, 02, 03, 04, 05, 06, 07, 08, 09, 10, 11
1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011
