More Images:

2005-2006 Toyota Tundra 4x4 & 2wd - 4.5" Suspension Lift Kit

FREE SHIPPING* Sale Price: $1,276.16

Reg Price: $1417.95

Price Good Through: February 15, 2012
Tuff Country
  • Brand: Tuff Country
  • SKU: 55902

Shipping: 4 to 10 Business Days     |    Weight: 150 lbs.

* Free Shipping offer excludes orders to Hawaii, Alaska, Canada & International

OPTIONS

Shocks
Boots
Gain additional tire clearance to fit 33" tires and get a cool new look with this Tuff Country Toyota Tundra 4.5" lift kit. This very popular lift kit uses a combination of a one piece subframe and upper coil / strut spacers to lift the front end while rear cast iron block lift the rear. Differential drop bracket, a front sway bar drop kit, upper ball joint spacers and a steering shaft extension keep everything aligned properly. Once installed this lift kit allows use of 33"x12.5" tires. Tuff Country has been producing quality suspension products for over 20 years and backs all lift kits with a limited lifetime warranty.

Features

  • Lifts rear of vehicle 3" for a level stance
  • One piece sub-frame increases strength & durability
  • Upper coil/strut spacer maintain a near factory ride
  • Stock front struts can be retained
  • New ball joint included with upper ball joint spacer
  • Allows use of 33" x 12.5" tires
Download Instructions #55902 Instructions
Recommended Tire Size: 33" x 12.5"
Amount of Lift: 4.5" Front / 3" Rear

Items Included

1) One piece subframe, 2) Upper strut spacers, 2) Differential drop brackets, 2) Sway bar drop brackets, 2) Upper ball joint spacers, 1) Steering shaft extension, 1) Lower skid plate (not shown in image), 2) Upper ball joint knuckle plate, 2) Cast iron 3" rear lift blocks, 4) Rear ubolts, 1) Hardware bag
1. Factory length shocks must be replaced with new extended rear shocks to install this lift kit properly. Please choose shocks & boots in the "Options" fields above if you have not already purchased extended shocks. Front struts can be retained
2. Factory rims will not fit with this lift kit. A rim with a 4.75" back spacing or less is required.