A level trailer means safer towing! Master Lock's "Zero Tilt" adjustable height trailer hitch ball mount is infinitely adjustable from 7 1/2 drop to 6 1/4" raise. The EZ Adjust feature allows the ball mount to be raised or lowered with a 7/8" wrench, socket or 3/8" ratchet drive. This ball mount is also a "One Tool Torque" ball mount that is designed to make installing and tightening your hitch ball much easier than with standard ball mounts. This also helps to eliminate damage to the finish of the hitch ball caused by slipping wrenches and sockets. This ball mount fits with any 2" x 2" receiver trailer hitch (Class 3 and above).

Features

• Fits all Class 3 Receiver Hitches (2" x 2" receiver)
• Infinitely adjustable from 7 1/2" drop to 6 1/4" raise
• EZ Adjust feature allows the ball mount to be raised or lowered with a 7/8" wrench, socket or 3/8" ratchet drive
• Ball mount height is retained by a patented spring clip feature
• One Tool Torque makes tightening hitch balls easier than ever, eliminates damage to hitch ball finish caused by using a wrench on the upper portion
• Master Lock Quality & Trust

Installation Note

While the "One Tool Torque" Ball Mount can be used with most all hitch balls, to take advantage of the "One Tool Torque" feature this ball mount must be use with a "One Tool Torque" hitch ball. Sold separately.

Tech Specs

Fits Receiver Type:	Class 3 (2" x 2")
Amount of Drop / Raise:	7 1/2" Drop (Max) / 6 1/4" Raise (Max)
Weight Capacity:	5000 lbs Trailer Weight / 500 lbs Tongue Weight
Receiver Pin Hole Size:	5/8" (Class 3 size)
Shank Hole Size (hole hitch ball mounts through):	1" diameter

View all "Trailer Hitches & Accessories"