This Viair pressure switch is designed to be use with an air tank connected to an air compressor. The pressure switch is made to turn off the compressor once the pre-set maximum PSI is reached and turn on the compressor once the PSI drops below minimum pre-set. Moisture resistant and tested to last over 10,000 cycles. Leads are pre-fitted with insulated 1/4" male push-to-connect terminals that are clearly marked.
|Voltage:||40 Amps (12 volt only)|
|PSI:||85 PSI on, 105 PSI off|
|Fitting:||1/8" NPT male fitting|
|Dimensions:||4.25"L x 2.25"W x 2.25"H|
- 4 lbs.