Want to lift your Dodge Ram and get the best possible ride and handling? Want more suspension articulation? Tuff Country EZ-Ride Suspension's Dodge Ram "Long Arm" Lift Kits are your answer!
This lift kit is designed to lift your Dodge Ram 6" using the long arm suspension system and all the great benefits. By replacing the factory control arms with the longer arms this creates less of an angle on the control arms which results in a much softer ride, dramatic handling improvements (reduces bump steer significantly) and better suspension articulation. Both upper and lower arms use greasable, re-build able flex joints which will reduce or eliminate the front suspension from binding. Replacement front coil springs lift the front of the Ram, cast iron blocks lift the rear. A track bar relocating bracket, drop pitman arm and front sway bar relocating brackets ensure everything is aligned properly. All this adds up to the ultimate Dodge Ram suspension lift kit.
At Suspension Connection we are the #1 retailer of Tuff Country products in the world. Great prices, expert knowledge and exceptional customer service are why so many customers trust us with their Tuff Country purchases. Try us out!
|Tuff Country has been producing quality suspension products for over 20 years and backs all lift kits with a limited lifetime warranty.|
Features & Benefits
- Allows use of 37" x 12.5" tires
- Dramatic improvement in ride quality and handling, reduces bump steer
- More suspension articulation for off-roading
- Simple bolt-on installation
- Greasable and Re-Buildable Flex Joints to reduce suspension binding
- Upgrade kit fits all Tuff Country lift kits and a variety of other mfg's lift kits
- Pitman arm & track bar relocating bracket included
- Limited Lifetime Warranty
|Download Instructions||36217K Instructions|
|Recommended Tire Size:||37" x 12.5"|
|Amount of Lift:||6" Front / 4" Rear|
|Drop Pitman Arm:||INCLUDED|
- Items Included:
- 2) 6" coil springs, 2) Lower Control Arms, 2) Upper Control Arms, 2) Long Arm Mounting Brackets, 1) track bar bracket, 2) Upper sway bar drop brackets, 2) 4" cast iron rear lift blocks, 4) Rear U-bolts, 1) Hardware bar, 1) Poly & sleeve kit, 1) Pitman arm
- 100 lbs.
- SKU #36217K Fits:
- 2012 Dodge Ram 3500
- 2011 Dodge Ram 3500
- 2010 Dodge Ram 3500
- 2009 Dodge Ram 3500
- 2008 Dodge Ram 3500
- 2007 Dodge Ram 3500
- 2006 Dodge Ram 3500
- 2005 Dodge Ram 3500
- 2004 Dodge Ram 3500
- 2003 Dodge Ram 3500
1. Vehicles with 2 piece rear drive shafts may require carrier bearing drop #20824D
2. Factory length shocks must be replaced with new extended shocks to install this lift kit properly. Please choose shocks & boots in the "Options" fields above if you have not already purchased extended shocks.