Viair Xtreme Duty Onboard Air System - (Duty Cycle 100% @ 100 psi)

Description

VIAIR's new X'treme Duty Onboard Air Systems (100% Duty Cycle, 2.68 CFM) make locating and installing all of the parts needed to make installing an onboard air system simple and efficient by including everything you need in one box. With dual compressors, the refresh rate of the tank is lightning fast and enough flow is available to run air tools on demand.

X'treme Duty Onboard Air Systems come with added value tools such as a tire inflation gun, a 200 PSI inline pressure regulator (for air lockers) and a versatile blow gun. Air up tires on the trail with ease or perform roadside repairs yourself using air tools. Comes with a 2-gallon (six-port) air tank, pneumatic fittings, pressure switch, electrical relays and parts, wiring, dash panel monitor, all required hardware and detailed instructions for a flawless install.

Features

12-VOLT
Complete air source solution
Will inflate up to a 37" tire
Includes (2) heavy duty compressors & 2.0 gallon air tank
Includes dash panel gauge with on/off switch
Permanent Magnetic Motor
Sealed design - Moisture & Dust Resistant
Oil-less Design
High Performance PTFE Piston Ring
Stainless Steel Valves
Anodized Aluminum Alloy Cylinder
Automatic Reset Thermal Overload Protector
1 year manufacture warranty

Specs

Voltage:	12-Volt
Duty Cycle:	100% @ 100 PSI
Max Working Pressure:	150 PSI
Max Amp Draw:	29 Amps
Min. Ambient Temp:	-40 degrees F
Max. Ambient Temp::	158 degrees F
Compressor Dimensions:	9" L x 4" W x 7" H
Compressor Net Weight:	8 lbs.

Viair Onboard Air Video

Parts Included

(1) 2.0 Gallon Viair Air Tank (2) 350C VIAIR Compressors (1) 30ft. Coil Hose (1) Tire Inflation Gun with 200 PSI Gauge (1) 0-150 PSI Pressure Regulator (1) Blow Gun (1) 1/4" NPT Quick Connect Coupler (F) (1) Dash Panel Gauge with ON/OFF Switch (1) Pressure Switch with Relay (110 PSI on, 150 PSI off) (2) 40-amp Relays (1) Inline Fuse Holder w/ Fuse (1) 1/4" NPT 175 PSI Safety Valve (1) 1/4" Drain Cock (2) 1/8" BSP to 1/4" NPT (Air Locker Use) (5) 1/4" NPT Compression Fittings (1) 4-inch Strip of Continuous Grommet Material (1) 20ft. 12 Gauge Wire with Inline Fuse Holder (2) T-Fitting (1/4"(M) x 1/4"(F) x 1/8"(F)) (1) Electrical Connections

Duty Cycle Reference Chart

Duty Cycle: 100 PSI @ 72F	Max. Run Time / Min. Rest Time
10% Duty Cycle	3 Min. On / 27 Min. Off
15% Duty Cycle	6 Min. On / 34 Min. Off
20% Duty Cycle	8 Min. On / 32 Min. Off
25% Duty Cycle	10 Min. On / 30 Min. Off
30% Duty Cycle	13 Min. On / 30 Min. Off
33% Duty Cycle	15 Min. On / 30 Min. Off
100% Duty Cycle	Continous Duty @ 100 PSI @ 72F

This compressor has a duty cycle of 100%

Note: Duty cycle refers to the amount of time a compressor can be operated in given time period at 100 PSI, at a standard ambient temperature of 72 degrees F. Duty cycle is commonly expressed in percentage format. The higher the percentage the longer run time. For more "frequently asked questions" on compressors see Viair FAQ Page.

Fill Rates

2.0 Gallon Tank	Fill Rate
0 to 145 PSI	1 min 57 sec
110 to 145 PSI	32 sec

35" x 12.5" Tire	Fill Rate
0 to 30 PSI	5 min 3 sec
15 to 30 PSI	2 min 30 seconds

37" x 12.5" Tire	Fill Rate
0 to 30 PSI	5 min 42 sec
15 to 30 PSI	2 min 50 seconds

Performance Data

PSI	CFM	A
0	2.68	17
10	2.30	19
20	2.22	21
30	2.12	23
40	1.98	25
50	1.87	26
60	1.80	27
70	1.73	27
80	1.66	28
90	1.56	28
100	1.52	28
110	1.45	28
120	1.38	28
130	1.27	29
140	1.17	29
150	1.06	28

PSI = Pounds per squre inch - A measure of air pressure generated by an air compressor. CFM = Cubic feet per minute - Volume of air produced by the air compressor at a given pressure or PSI. A = Amps - A measure of the amount of electrical current used.